Four of these CIM motors (12V DC)
will be used on our drivetrain.
Six of these 8x1.5 high
friction wheels will be used.
Our chassis will be one solid piece of welded aluminum mainly consisting of 3/4" box aluminum extrusion and 2" angle aluminum, as well as an assortment of other aluminum pieces.
These four parts along with two motors will be used to construct a left and a right side drivetrain.
This is a rough estimate of what one side of the drivetrain will look like.
(not including driveshafts, sprockets and chains)
And finally here's a look at what the completed chassis/drivetrain will be.
No comments:
Post a Comment